• Model rx2620 base system with one 1.6 GHz/6 MB CPU (200 MHz system bus, 400 MT/s).
  System includes one CPU, core I/O, and one power supply. Must select rack mounting kit or standalone mounting kit.
  AB331A
  
• Model rx2620 base system with one 1.6 GHz/3 MB CPU (200 MHz system bus, 400 MT/s).
  System includes one CPU, core I/O, and one power supply. Must select rack mounting kit or standalone mounting kit.
  AB332A
• Model rx2620 base system with one 1.3 GHz/3 MB CPU (200 MHz system bus, 400 MT/s).
  System includes one CPU, core I/O, and one power supply. Must select rack mounting kit or standalone mounting kit.
  AB333A

• Four Operating System support: HP UX 11i version 2, Windows Server 2003 Enterprise Edition, Linux and OpenVMS (V8.2 minimum version)
  
• Dual channel Ultra320 SCSI controller, 2 internal disks on one channel, 1 internal disk on a second channel
  
• External Ultra320 SCSI port
  
• Two ports 10/100/1000Base TX LAN (auto speed sensing, RJ 45 connector)
  
• Optional Management Processor Card for remote management and HA monitoring
  NOTE: Management Processor Card is required for Windows configurations and Linux RHEL 4 configurations
  
• Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
  
• One general purpose RS 232 serial port
  
• Three RS 232 serial ports linked to the management processor (multiplexed from a single DB 25 port); one general purpose, one remote and one local console
  
• Factory integration of CPUs, memory, disk drives, removable media, and I/O cards
  
• Rackmountable into 19 inch cabinets
  
• Optional stand alone pedestal mount
  
• One year warranty with next business day on site

• One 64 bit Intel® Itanium 2® CPU: Either 1.3 GHz/3.0 MB cache (200 MHz system bus, 400MT/s), 1.6 GHz/3 MB cache (200 MHz system bus, 400 MT/s) or 1.6 GHz/6 MB cache (200 MHz system bus, 400 MT/s)
  
• 1 GB PC2100 ECC Registered DDR266A SDRAM (4×256MB DIMMs)
  
• One internal DVD drive for OpenVMS and Windows
  
• One power supply

• Two 64 bit Intel® Itanium 2® CPUs: Either 1.3 GHz/3.0 MB cache (200 MHz system bus, 400 MT/s), 1.6 GHz/3 MB cache (200 MHz system bus, 400 MT/s) or 1.6 GHz/6 MB cache (200 MHz system bus, 400 MT/s)
  
• 24 GB PC2100 ECC Registered DDR266A SDRAM (12×2GB DIMMs)
  
• Two Hot swap power supplies, providing N+1 protection for power supplies and power input
  
• Four PCI X/PCI IO adapter cards
  
• One internal DVD ROM or DVD+RW drive
  
• Three internal hot plug LVD SCSI disks

• Four Operating System support: HP UX 11i version 2, Windows Server 2003 Enterprise Edition, Linux and OpenVMS (V8.2 minimum version)
• Dual channel Ultra320 SCSI controller, 2 internal disks on one channel, 1 internal disk on a second channel
• External Ultra320 SCSI port
• Two ports 10/100/1000Base TX LAN (auto speed sensing, RJ 45 connector)
• Optional Management Processor Card for remote management and HA monitoring
  NOTE: Management Processor Card is required for Windows configurations and Linux RHEL 4 configurations.
• Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
• One general purpose RS 232 serial port
• Three RS 232 serial ports linked to the management processor (multiplexed from a single DB 25 port); one general purpose, one remote and one local console
• Factory integration of CPUs, memory, disk drives, removable media, and I/O cards
• Rackmountable into 19 inch cabinets
• Optional stand alone pedestal mount
• One year warranty with next business day on site
  

• N+1 Hot swap cooling
  
• One Hot swap power supply standard-optional second hot swap power supply for N+1 protection
  
• On-line memory page deallocation
  
• ECC protected DDR memory
  
• Memory chip spare to overcome single DRAM chip failures
  
• Dynamic Processor resilience and deallocation
  
• UPS power management
  
• Hot Plug internal disks
  
• Two independent Ultra SCSI channels to internal disks for mirroring across disks and channels
  
• Journal file system for HP-UX
  
• Auto reboot
  
• HP MC/ServiceGuard for HP-UX
• Microsoft Cluster Services
  
• HP StorageWorks Secure Path
  
• HP ServiceGuard Extension for RAC for HP-UX
  
• ServiceGuard Manager for HP-UX
  
• Insight Manager 7-proactive fault management
  
• EMS HA Monitors for HP-UX
  
• ECM Toolkit for HP-UX
  
• MirrorDisk for HP-UX
• OpenVMS Clusters

• Separate LAN for system management
  
• Password protection on console port
  
• Disablement of remote console ports
  
• SSL encryption on web console
  

• HP Ignite-UX for installation and deployment of the operating system
• HP Software Distributor-UX for software and patch management
• HP Servicecontrol Suite for HP-UX
• HP System Insight Manager (SIM)
• HP Integrity Essentials Foundation Pack for Windows, includes Smart Setup CD for easy server setup and configuration
• Integrated Lights Out (iLO) Management Processor Card for comprehensive remote management. NOTE: Card is required for Windows orders, Linux RHEL 4 orders, and OpenVMS orders
• Optional Integrated Lights -ut (iLO) Advanced Pack activation key and license
• Process Resource Manager for HP-UX workload management

• 1.3 GHz with 3.0 MB Level 3 Cache
  
• 1.6 GHz with 3.0 MB Level 3 Cache
• 1.6-GHz with 6.0-MB Level 3 Cache

All processors support:

• Level 2 Cache: 256 KB
  
• Level 1 Cache: 32 KB
  
• 200 MHz System Bus (400 MT/s)
  
• Single bit cache error correction
  
• 50 bit physical addressing
  
• 64 bit virtual addressing
  
• 4 GB maximum page size
  

Affected Intel Itanium 2 processors products for the Integrity rx2620 are:

• AB334A Intel Itanium 2 1.6-GHz 6MB
  
• AB335A Intel Itanium 2 1.6-GHz 3MB
  
• AB336A Intel Itanium 2 1.3-GHz 3MB

ACTION:
Check server firmware prior to installing any of these processor products. The rx2620 requires system firmware 03.17 or later. The firmware version can be checked as follows:

FIRMWARE INFORMATION
Firmware Revision: 3.17 [4513]
BMC Revision: 3.47
Management Processor Revision: E.03.15
Updatable EFI Drivers:
Floating-Point Software Assistance Handler: 00000118
LSI Logic Ultra320 SCSI Driver: 01040200
Broadcom Gigabit Ethernet Driver: 00070003
Intel(R) PRO/1000 Ethernet Driver: 00002160

If firmware requires updating, the firmware upgrade instructions are included in the Release Notice that is included in the download bundle.

To download the firmware, go to http://www.hp.com/bizsupport.

NOTE:
After the firmware has been downloaded to the server, proceed with attaching the Processor Add-On Products to the server using the Server Installation Guide. The installation guide is provided:

• On the CD-ROM that shipped with Server
  
• On the http://docs.hp.com Web site

• Memory must be installed in groups of four DIMMs, also known as quads
• Each quad must consist of equal density DIMMs
• Memory can be ordered in quads of 1 GB (4×256 MB), 2 GB (4×512 MB), 4 GB (4×1 GB), or 8 GB (4×2 GB)
• Minimum memory is 1 GB (4×256 MB)
• Maximum memory is 24 GB (12×2 GB)
• Memory must be loaded in the specific order outlined on the system board.
• Each quad of memory is loaded across both memory buses (two DIMMs on each bus) to ensure maximum bandwidth and performance
• Total memory bandwidth is 8.5 GB/s, split across two 4.25 GB/s memory buses
• Open page memory latency is 80 nanoseconds

The HP Integrity rx2620-2 was designed for and tested in HP cabinets. HP cabinets are the best option for customers who want to ensure that their rack environment offers the utmost in safety, ease of service, factory integration, and HP field support. The HP cabinet family is made up of the following products:

• A4900A-(25 EIA Units): up to 12 rx2620-2 servers
• A4901A-(33 EIA Units): up to 16 rx2620-2 servers
• A4902A-(41 EIA Units): up to 20 rx2620-2 servers

For factory integration, order racking product number A6939AZ in the HP Integrity rx2620-2 ordering guide.

• Anti Tip – The rack/cabinet must be solidly anchored to the floor both front and rear. This is usually accomplished by anti-tip feet or by direct bolting to the floor.
• Air Flow – The HP Integrity rx2620-2 uses front to back airflow to cool the unit. Thus a cabinet cannot have a solid front or rear door. Solid doors may have to be removed or changed to an open perforation pattern.
• Cable Strain Relief – A proper method of strain relief must be used. This may force the elimination of the rear door in some cases.
• Front and Rear Access – For proper cooling and ease of service access, HP recommends 32 inches of unobstructed floor space in the front and rear of rack installations. This recommendation applies to both HP and third party racks and cabinets.

If a rack is not required, the system can be mounted vertically in the stand alone pedestal mount (A6940A).

The four open PCI-X slots all have their own dedicated 64-bit 133-MHz PCI-X bus and their own independent I/O channel or channels. The independent channels provide improved I/O performance and error containment. Independence protects each I/O card from bus hangs or extended latencies due to the failure or high bandwidth demands of other I/O cards. Independence also ensures that each I/O card can achieve maximum throughput.

The first PCI-X slot has two dedicated I/O channels, resulting in sustained PCI-X bandwidth of 1.0 GB/s. This slot should be reserved for the highest bandwidth cards, such as clustering interconnects or multi port storage adapters. The remaining three PCI-X slots each have a single dedicated I/O channel, resulting in 0.5 GB/s of sustained bandwidth on each slot.

All I/O slots are keyed for 3.3V I/O cards. 5V cards are not supported in the HP Integrity rx2620-2. The remaining three I/O channels are allocated to the integrated core I/O.

J3525A

• Two 10/100/1000Base T LAN with RJ 45 connector-Supports LAN boot for operating system installation and wake on LAN capability
  
• Two channel Ultra320 SCSI controller; one external port with 68 pin high density connector and one internal port for integrated disks
  
• Four USB 2.0 style A ports (USB 1.1 compatible)
  
• One general purpose serial ports (Serial B); two general purpose serial ports if Management Processor Card is installed.

• Dedicated 10/100Base-T LAN port for LAN console and embedded web console access
  
• DB-25 serial port-multiplexed (using W cable) into three RS-232 ports: local ASCII console, remote/modem console, and general purpose
  
• Password protected console ports
  
• Console mirroring between all local, modem, LAN, and web consoles
  
• Remote power up and power down control
  
• Configurable remote access control
  
• Event notification to system console-Provides connectivity, information, and support for HP UX tools (such as STM and EMS) to notify by email, pager and/or HP response centers.
  
• Interface to system monitoring and diagnostic hardware via an internal IC bus
  
• Secure Sockets Layer security on web console
• Management Processor Card is required for Windows and Linux RHEL 4 configurations
  
• Support for Integrated Lights-Out (iLO) Advanced Pack activization key and license (AB500A). Firmware license installs on the integrated Processor Management Card. Integrated Lights-Out (iLO) Advanced Pack provides additional remote management capabilities, including LDAP directory services, SSH security, and Group Actions with HP Systems Insight Manager (SIM)
  
• The Management Processor Card provides basic graphic capabilities via integrated Radeon 7000 2D graphics chip. VGA port is provided on rear of the system. Supported resolutions and refresh rates include:

The HP Integrity rx2620-2's integrated Management Processor provides five methods for console connections.

• SSL-secured Web console accessible through the 10/100Base-T management LAN
  
• Standard telnet connections accessible through the 10/100Base-T management LAN
  
• Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS-232 serial connection
  
• Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem
  
• VGA graphics console-supported on Windows, Linux, and HP-UX-using the integrated VGA port.

• The HP Integrity rx2620-2 supports up to three internal low profile hot plug disk drives.
  
• A dual channel U320 SCSI channel provides independent channels for the internal disks-two disks on one channel and one disk on a second channel. Split SCSI channels provide enhanced high availability-one channel can fail without impacting the disks on the other channel.
  
• Supported by MirrorDisk/UX across disk drives and independent channels
  
• The Smart Array 5302 and 5304 U160 SCSI RAID cards are available for hardware RAID under the Windows and Linux operating systems. Currently, the hp factory does not load the operating system in a RAID configuration. Customers should order internal RAID cables (A9827A) and re load their operating system if internal RAID is desired.
  
• For Windows, the SmartArray 6402 may be factory configured to support RAID 1 on the internal disks
  
• 36 GB 15K, 73GB 15K, 146 GB 10K and 300-GB 10K hot plug Ultra320 SCSI disks are supported
  
• Optional optical media drives include a DVD ROM (A9919A) and DVD+RW (AB348A). A DVD drive is required for all OpenVMS and Windows configurations. Third party software (not included with the AB348A) is required to support DVD write with Windows on AB348A. OpenVMS will support DVD write capability in a future release of the operating system.
  
• Factory configured RAID 1 array on internal disks is supported on the IPF servers. Refer to the following URL for details on servers, Smart Array cards, and operating systems supported.

  http://www.docs.hp.com/en/RAID_SM-20050125/CombinedRaidsupportMatrix.html

The HP Integrity rx2620-2 provides a high level of integrated power protection.

• N+1 redundant hot swap power supplies (N=1)
  
• N+1 redundant AC power input protection with electrical phase isolation (N=1)
  
• Power monitoring and control
  
• The HP Integrity rx2620-2 supports up to two hot swap power supplies for N+1 protection. One supply is shipped as a standard component with every system. The second supply is optional.
  
• The HP Integrity rx2620-2 provides an independent power input receptacle for each power supply. The independent design provides protection against losing the connection from a power cord or breaker. The HP Integrity rx2620-2 power cords should always be plugged into separate breakers when possible.
  

Assumes:

• 1 Intel® Itanium 2® Processor 130W @ 85% max
• ½ I/O CCA @ 25W and ½ I/O CCAs @ 15W
• 2GB DIMMs
• Typical Power Usage
• 3 Hard Disk Drives
• No CD ROM

The information contained herein is subject to change without notice.

Intel and Itanium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.